Our company is the sole distributor of Measurand measuring devices in Poland
MEASURAND measuring system – known as IPI (InPlaceInclinometer) – is a modern chain probe with a length adapted to the depth of the test hole. Individual cells with a length of 0.5 m, record horizontal displacements and automatically send data to the cataloger, where the measurement results are transmitted via the GSM system to the server. Each authorized person has access to all measurement results and to full analysis on dedicated software.
The software enables the presentation of results in 3D. It is a fully automatad process and the frequency of its performance is adapted to the requirements of the monitored object. Everyone interested in the modern automatic displacement measurement system in building construction (diaphragm walls, deep foundations), in hydrotechnical construction (high dams, abutments, flotation tanks and settling tanks) and specialist, in opencast mines as well as in areas exposed to landslide processes, we invite you to team work.
We have been dealing with geotechnical measurements for over 20 years. We offer professional advice. We design measurement systems adequate to the needs of the object, both in terms of measuring equipment and the frequency of measurements. Our specialized staff ensures very good quality of measurements received. New, unusual projects – these are new experiences and challenges that we are not afraid of. We also encourage contractors. We provide assistance and training during the first installation as well as constant technical support.
SAAV is the most advanced ShapeArray model to date. Inspired by direct feedback from clients, Measurand developed a new installation method unique to the SAAV that allows the ShapeArray to be installed directly into existing conventional inclinometer casings or narrow conduit.
SAAV is ideal for retrofitting ShapeArray instrumentation into existing conventional inclinometer casings or for new installations in ungrooved casings or conduit. SAAV’s off-the-reel cyclical installation system (patent-pending) inserts the ShapeArray in a zigzag pattern into casings from 47 mm to 100 mm internal diameter (ID). The SAAV is then locked into place with a custom-designed spring box assembly. However, with a simple conduit adapter, SAAV can also install into 27 mm ID conduit, giving the client the flexibility to install SAAV in a manner that suits the project requirements. For situations where the SAAV is not required to reach all the way to the bottom of the casing, we offer silent segments for SAAV. Silent segments have no sensors inside and are connected at the far, non-cable end of the SAAV to increase the total length of the array. This innovation is useful when SAAV is installed into existing casings where the shear zones are known to be well above the bottom of the hole or to accommodate for casing depths that are not well known at the time of order.
SAAV contains upgraded MEMS sensors that reduce power consumption and improve resolution.
SAAV is available with 500 mm segment length segments, up to 150 metres long.
Purpose-built with longer one metre segments for heavy duty horizontal installation: soil settlement, rail-line deformation, and pipeline monitoring.
Short and long term
Purpose-built for heavy duty horizontal measurement: soil settlement, rail-line deformation, and pipeline monitoring. SAAX1000’s watertight construction combines twist-resistant joints and thick-walled stainless steel segment tubes. The construction contains a compact array of MEMS accelerometers.
SAAX1000 delivers superior cost-benefit returns to project budgets. All ShapeArray installations are fast and low-cost, requiring far fewer people than traditional in-place inclinometers. SAAX1000 is rolled off a reel and set into user-installed conduit.
SAAX1000’s segment length is 1000 mm. SAAX1000 can can be manufactured to a maximum length of 150 m. All ShapeArrays are manufactured in an ISO 9001 certified facility.